Christmas tree Mold
Christmas tree mold with balls 14,5cm (5,7") height, 9,5cm (3,7") diameter 315g finished candle weight
We offer you a high quality handmade silicone mold of the European production (not China) , which is made of high-quality silicone with the vacuum equipment.Easy to demould, but not easy to deformate.
The color of molds could be different - it will not influence on the quality of the final product.
Depending on the type of mold, there may be cuts for free extraction of finished product graphics. Please understand that this is not a defect, it is a necessity. Due to the specific geometry, some dies do not need to be cut. Without these cuts, you will not be able to remove the finished product. In order to use the mold correctly, you must:
1. Place the mold on a flat horizontal surface.
2. Fix the joint with rubber band or tape.
3. Make sure all cutting joints are in place. It is important to ensure the correct locking pressure. (not too weak or too strong)
4. If the finished product has joints, it must be polished.
5. If these simple rules are not followed, good results will not be obtained when using the mold.
Australia, New Zealand, China - 14-35 days
Canada US 10-25 days
We offer you a high quality handmade silicone mold of the European production (not China) , which is made of high-quality silicone with the vacuum equipment.Easy to demould, but not easy to deformate.
The color of molds could be different - it will not influence on the quality of the final product.
Depending on the type of mold, there may be cuts for free extraction of finished product graphics. Please understand that this is not a defect, it is a necessity. Due to the specific geometry, some dies do not need to be cut. Without these cuts, you will not be able to remove the finished product. In order to use the mold correctly, you must:
1. Place the mold on a flat horizontal surface.
2. Fix the joint with rubber band or tape.
3. Make sure all cutting joints are in place. It is important to ensure the correct locking pressure. (not too weak or too strong)
4. If the finished product has joints, it must be polished.
5. If these simple rules are not followed, good results will not be obtained when using the mold.
Australia, New Zealand, China - 14-35 days
Canada US 10-25 days